|
DTF Powder Adhesive
Our DTF Powder Adhesive is the preferred choice for creating quality DTF Transfers. This medium powder strikes a balance between fine and coarse particles.
This powder ensures glossy results after curing and reduces susceptibility to static, resulting in high-quality prints. It also offers superior stretchability, meaning it works on performance polyesters and some lycra/spandex as well.
Instructions are simple:
• Apply the powder evenly to wet ink
• Shake off excess from the film
• Average cure specifications:
• 240°F / 115° C temperature for 2-3 minutes until the powder is melted (time and temp may vary based on your specific dryer and environment. Testing is highly recommended.) | Notes: | Not guaranteed to work with all shaker systems. Made in Europe, this product meets high-quality standards. Curing and heat pressing DTF transfers should be conducted in a well-ventilated room with good airflow to ensure safety and minimize exposure to fumes, which can be hazardous to health. |
|
|
|
